13
3 Preparing the CX-24/12
3-2 Connection
Connect the cable to either the parallel or the serial port. Be sure that the power to both the computer and the
main unit is switched off when connecting the cable.
Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.
NOTICE
Cables are available separately.
One which you are sure
matches the model of computer
being used should be selected.
For IBM PC or PC compatibles
Serial (RS-232C) cable
Parallel (Centronics) cable
Printer connector on the computer
RS-232C connector on the computer
Serial (RS-232C) Input
Connector
Parallel (Centronics)
Input Connector
For Macintosh
Crossover serial cable
Cables are available separately.
Printer Port
Modem Port
Connect to either port.
Serial Input Connector
To Next Page
Loading...
Need help?
General