Roland Camm-1 CX-24/12 User Manual

54
13 Specifications
*..... CX-24 only
13 Specifications
Driving method
Maximum cutting area
Acceptable media widths
Acceptable paper widths
Acceptable paper types
Tools
Max. cutting speed
Blade force
Mechanical resolution
Software resolution
Distance accuracy
Repetition accuracy
Interface
Buffer size
Instruction system
Switches
Control switches
Display
Power consumption
Acoustic noise level
Dimensions
Weight
Operating temperature
Operating humidity
Accessories
Width: 584 mm (22-15/16 in.)
Length: 24,998 mm (984-1/8 in.)
50 to 700 mm (1-15/16 to 27-1/2 in.)
50 to 700 mm (1-15/16 to 27-1/2 in.)
Media-movement method Stepping motor (Micro-step)
Width: 280 mm (11 in.)
Length: 24,998 mm (984-1/8 in.)
50 to 395 mm (1-15/16 to 15-1/2 in.)
50 mm to 395 mm (1-15/16 to 15-1/2 in.)
High-quality paper
Cutters: Special cutter for CAMM-1 series
Pens: Water-based fiber-tipped pens, and Thick water-based fiber-tipped pens (options)
During cutting: 400 mm/sec. (15-11/16 in./sec.) (45-degree direction)
(when [HEAVY] is selected on the display menu: 100 mm/sec.(3-7/8 in./sec.))
30 to 200 gf
0.05 mm/step (0.00197 in./step)
0.025 mm/step (0.000984 in./step)
Error of less than +/- 0.2% of distance traveled, or 0.1 mm (0.00394 in.), whichever is grater
0.1 mm (0.00394 in.) or less (Excluding stretching/contraction of the material,
and provided that material length is under 1600 mm (62-15/16 in.))
Parallel (Centronics compatible), Serial (RS-232C)
1 Mbyte (800 Kbyte for replot buffer)
CAMM-GLIII (mode1 and mode2)
Power switch
Dial, TEST, ORIGIN,
, , , , ENTER, MENU/PARAM
Liquid crystal display unit: 16-character by 1 line
Maximum: 0.9 A /100 to 240 V ± 10 % 50/60 Hz
[Cutting mode] : less than 70 dB (A) [Standby mode] : less than 40 dB (A)
(According to ISO 7779)
850 mm (W) x 300 mm (D) x 240 mm (H)
(33-1/2 in. (W) x 11-13/16 in. (D) x 9-1/2 in. (H))
14 kg (30.9 lb.)
545 mm (W) x 300 mm (D) x 240 mm (H)
(21-1/2 in. (W) x 11-13/16 in. (D) x 9-1/2 in. (H))
10 kg (22 lb.)
5 to 40°C (41 to 104°F)
35 to 80% (non-condensing)
Power Cord x 1, Blade x 1, Blade Holder XD-CH3 (Cutter holder and pin) x 1, Startup Manual x
1, To Ensure Safe Use x1, Roland Software Package CD-ROM x 1, Roller base x 1*
CX-24 CX-12

Roland Camm-1 CX-24/12 Specifications

General

Brand	Roland
Model	Camm-1 CX-24/12
Category	Plotter
Language	English