Roland Camm-1 CX-24/12 User Manual

15
3 Preparing the CX-24/12
1
2
3-3 Installing the Driver
The included Roland Software Package CD-ROM contains a Windows-based program and driver for performing cutting with the CX-24/
12.
CAMM-1 DRIVER
This software is required when sending data from a Windows-based program to the CX-24/12. If you're using Windows, be sure to install
this driver.
Refer to the included Startup Manual and install them on your computer.
3-4 Port Setting
The CX-24/12 automatically detects the port used for connection to the computer.
However, if cutting data is not sent correctly, check the communication parameters for the driver and use the display menu on the CX-24/
12 to make the same settings as for the driver.
Checking the Communication Parameters for the Driver
Right-click on the icon for the driver of the model
you're using then click [Properties].
The [Roland CAMM-1 CX** **Properties] dialog
box appears.
For the CX-24:
[Roland CAMM-1 CX-24]
For the CX-12:
[Roland CAMM-1 CX-12].
Click [Start].
Point to [Settings] and click [Printers].
The [Printers] folder appears.
3
Click the [Detail] tab.
Click the [Port Settings] to display the communica-
tion parameters for the driver.

Roland Camm-1 CX-24/12 Specifications

General

Brand	Roland
Model	Camm-1 CX-24/12
Category	Plotter
Language	English