Rotax 912 i series Service Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
PROPELLER GEARBOX
Figure 7.28: Overview
1
Propeller gearbox
CHECKING THE PROPELLER GEARBOX
General note
See Heavy Maintenance Manual Heavy for the engine type 912 i Series.
The gearbox must be inspected, repaired or overhauled in accordance with the BRP-Ro-
tax instructions for continued airworthiness.
Detailed inspection of the affected gearbox components in accordance chapter 72-00-00
in the Heavy Maintenance Manual.
NDT Crack testing of the propeller shaft is not normally planned, but can be carried out if
cracks are suspected.
NOTE
The drive gear is considered part of the gearbox. Therefore it must be removed
from the crankshaft and be included when sending the gearbox for repairs or
overhaul.
12–20–00
Page 52
September 01/2018
Effectivity: 912 i Series
Edition 2/Rev. 0

Rotax 912 i series Specifications

General

Brand	Rotax
Model	912 i series
Category	Engine
Language	English