Rotax 912 i series Service Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
AUTHORIZED PERSONNEL
General note It is a requirement that all organizations or individuals possess the required special tool-
ing. Technicians must have type-specific training and keep a recurrent knowledge status
for the level of work they intend to perform. Technicians may require accreditation from
their local aviation authority in addition to any BRP-Rotax requirements.
Requisite
knowledge
Any task outlined herein may be performed if the organization or individual has met the fol-
lowing conditions:
Requisite knowledge of the task as a result of:
• Type-specific training (for the applicable ROTAX® aircraft engine) which is approved
by the national aviation authorities and/or BRP-Rotax.
or
• Experience in performing the task or
• Formal instruction from a BRP-Rotax authorized training facility or
• Instruction by an authorized BRP-Rotax Distributor representative.
Technicians must:
• maintain a suitable work environment to prevent contamination or damage to engine
parts or modules.
• use the required tools and fixtures as outlined in the ROTAX® Maintenance Manual.
• ensure reasonable and prudent maintenance practices are utilized.
• ensure the requirements of the applicable regulatory authority regarding maintenance
procedures are met.
For more detailed information, maintenance organizations and individuals are encouraged
to contact BRP-Rotax through its worldwide distribution network for information and guid-
ance on any of the tasks outlined herein.
See Chapter 00-00-00 section Technical Documentation.
Type-specific
training
Type-specific training:
• Independent ROTAX® Maintenance Technician (iRMT) training can be obtained from
a ROTAX® approved training organization. Courses are available in various levels to
suit the requirements of work the technician needs to perform. Each rating is valid for
a 2 year period.
Valid time ROTAX® iRMT specialty ratings are valid for a 2 year period after initial instruction. Recur-
rent training is required after 2 years to maintain a current status. In order to be eligible for
the renewal program training, the technician must be able to show and declare that they
have been working on ROTAX® engines during the past 2 years.
Effectivity: 912 i Series
Edition 2/Rev. 0
05–00–00
Page 3
September 01/2018

Rotax 912 i series Specifications

General

Brand	Rotax
Model	912 i series
Category	Engine
Language	English