Ruijie Reyee RG-NBR-E Series User Manual

Cookbook Overview
4
1.2.2 Ruijie RG-NBR6205-E Router
1. Appearance of Ruijie RG-NBR6205-E Router
Figure 1-3 Front Panel of Ruijie RG-NBR6205-E Router
Table 1-4 Description of the Front Panel of Ruijie RG-NBR6205-E Router
No.
Indicator/Port
Description
1
SATA
SATA hard disk indicator:
If it is steady green, the SATA hard disk is in place.
If it blinks green, the SATA hard disk is reading or writing data.
2
PWR
Power indicator:
If it is steady green, the router is receiving power properly.
If it is off, the power module is faulty or not powered on.
3
Console
Console port. It connects to the console cable. After connecting to the serial
port of the management PC, the device can be managed through the console
port.
4
USB
Two USB ports
They are USB2.0 ports that connect to USB-compliant peripheral devices,
such as USB flash drives.
5
LAN1
If it is steady orange, the port is connected at a rate of 1000 Mbit/s.
If it is off, the port is connected at are rate of 10 Mbit/s or 100 Mbit/s.
6
WAN6
If it is steady green, the port is connected at a rate of 10 Mbit/s, 100
Mbit/s or 1000 Mbit/s.
If it blinks green, the port is receiving or transmitting traffic.
7
8F
If it is steady green, the port is connected.
If it blinks green, the port is receiving or transmitting traffic.
8
GE fiber ports
Two SFP ports (8F, 9F):
WAN ports by default that support the WAN/LAN switchover.
Support 1000BASE-SX/LX/ZX mini GBIC and GE-SFP-LX20/LH40-BIDI
SPF modules.
1 2
11 10
3 4
5
6 7
89

Ruijie Reyee RG-NBR-E Series Specifications

General

Brand	Ruijie
Model	Reyee RG-NBR-E Series
Category	Network Router
Language	English