Cookbook Upgrade and Maintenance
139
(1) On the management PC, hold down the Win key (with Windows logo) and press the R key on the
keyboard to open the run dialog box. Enter cmd and click OK to enter the command prompt of the
management PC.
(2) Enter the telnet IP address of the router’s interface command and press Enter.
(3) Enter the password as prompted and press Enter. The enable password for entering privileged EXEC mode
is the same as the Telnet password.
4.2 Configuring a Password
If you forget your web login password, you can restore the current password to the default password admin.
Procedure
To Next Page
Loading...
Need help?
General
