ŝ9Ş
Connecting to a Power Source
Important information about battery usage.
ƃ When the camera is not used, turn off the camera power.
ƃ Please remove the battery if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside
the camera.
ƃ Low temperatures (below 0˚C) can affect the performance of the battery
and you may experience reduced battery life.
ƃ Batteries will usually recover at normal temperatures.
ƃ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
ƃ When you use earphones, do not remove the battery while the camera is
turning on. It may generate a loud noise.
INFORMATION
ƈ You can charge the rechargeable battery (SLB-1137C) by using the SAC-45 KIT
which consists of the AC adapter (SAC-45) and the USB cable (SUC-C2).
When the SAC-45 and SUC-C2 are combined, they can be used as an AC cable.
ƃ Using an AC cable
: Connect the AC adapter to the USB cable.
It can be used as a power cable.
ƃ Using a USB cable
: Remove the AC adapter (SAC-45).
You can download stored images to your PC
(p.113) or supply the power to your camera
through the USB cable.
Important information about USB cable usage.
ƃ Use a USB cable (SUC-C2) with the correct specification.
ƃ If the camera is connected to the PC through a USB hub :
connect the camera directly to the PC.
ƃ If the camera and other devices are connected to the PC at the same time :
remove other device.
ƃ If the USB cable is connected to a port located on the front of the PC :
remove the cable and connect it to a port located on the back of the PC.
ƃ If the USB port of the PC doesn't meet the Power output standard (5V,
500mA), the camera may not be charged.
CAUTION
ƈ How to charge the rechargeable battery (SLB-1137C)
Charging LED
To Next Page
Loading...
Need help?
General
