ŝ17Ş
Starting the recording mode
ƈ How to use the PROGRAM mode ( )
Selecting the program mode will configure the
camera with optimal settings.
You can still manually configure all functions
except the aperture value and shutter speed.
1. Select the Program mode.
2. Configure advanced functions such as image
size, quality, effects, sharpness and metering.
ſ Refer to page 30-48 for more information
about the menus.
ƈ How to use the AUTO mode ( )
Please select this mode for quick and easy picture taking with minimal user
interaction.
[AUTO mode]
1. Insert the battery (p.10) taking note of the
correct polarity (+ / -).
2. Insert the memory card (p.10). As this camera
has a 450MB internal memory, it is not
essential to insert the memory card.
If the memory card is not inserted, an image
will be stored in the internal memory.
If the memory card is inserted, an image will be
stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date / time that is displayed on the LCD monitor is incorrect, reset the
date / time before taking a picture.)
5. Select the Auto mode by pressing the Mode button or pressing the mode icon
(p.16, p.25).
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
7. Press the shutter button to capture an image.
[PROGRAM mode]
ƃ If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is unable to capture an image clearly.
INFORMATION
To Next Page
Loading...
Need help?
General
