Enabling Voice Recognition
Say the trigger word or press VOICE button to run Voice Recognition. Say a command. You can
use Voice Recognition to operate the TV. If Voice Recognition is not working, check to see if Voice
Recognition (Smart Features > Voice Recognition > Voice Recognition) has been enabled. To use
Voice Recognition, Voice Recognition must be set to On.
"
While Voice Recognition is activated, the TV can turn on automatically due to an environmental input.
Basic Voice Recognition Use
You can use the following commands anytime while Voice Recognition is active:
●
All Voice Commands: Say "Show all commands" to display a complete list of voice commands
by category. Say the name of a category.
●
Available Voice Commands: A list of basic voice commands available in the current state is
shown.
●
TV Basics
–
Adjust Volume: Say "Volume up" / "Volume down".
–
Change Channels: Say "Channel up" / "Channel down".
–
Power off: Say "TV Power Off".
–
Moving the Focus: Say "Focus left", "Focus right", "Focus up", or "Focus down" to move
the focus. However, these commands can only be used in situations when the focus can be
moved.
–
Select Item: Say "Select".
●
Apps and Services
A list of the words associated with the Apps and Services available in the current state is shown
as "Explore 3D", "Web Browser", "Samsung Apps".
Only preset voice commands are recognised. Available voice commands may vary, depending on the
software version.
To Next Page
Loading...
Need help?
General
