Sanyo PLC-SW30 User Manual

18
Before Operation
Menu Bar
For Computer Source
PC System Menu
Used to select
computer system.
(
☞ P23 )
Image Adjust Menu
Used to adjust computer image.
[Contrast / Brightness
/ Color
temp. /
White balance (R/G/B)
/
Gamma / Auto grayscale]
( ☞ P28 )
Setting Menu
Used to change
settings of the
projector or reset
Lamp replace counter.
(
☞
P36-38 )
Sound Menu
Used to adjust
volume or
mute sound.
( ☞ P21 )
Image Select Menu
Used to select an
image level among
Standard, Real,
and Image 1 – 4.
(
☞
P27 )
AV System Menu
Used to select
system of selected
video source.
( ☞ P32 )
Image Adjust Menu
Used to adjust picture image.
[Contrast / Brightness
/ Color / Tint
/
Color temp. / White balance (R/G/B) /
Sharpness /
Gamma / Auto
grayscale / Progressive]
( ☞ P34 )
For video source
Same function as menu
for computer source.
Input Menu
Used to select
input source
either Video or
Computer.
( ☞ P30-31 )
PC Adjust Menu
Used to adjust
parameters to
match with input
signal format.
(
☞
P24-26 )
Image Select Menu
Used to select an
image level among
Standard, Cinema and
Image 1 – 4.
(
☞
P33 )
Screen Menu
Used to set size
of image to
Normal or Wide.
(
☞
P35 )
Guide Window
Shows the selected
item of the On-
Screen Menu.
Same function as
menu for computer
source.
Input Menu
Used to select
input source
either Computer
or Video.
(
☞
P22 )
Screen Menu
Used to adjust size
of image. [Normal
/ True / Wide /
Digital zoom +/–]
( ☞ P29 )

Sanyo PLC-SW30 Specifications

General

Native aspect ratio	4:3
Projection distance	- m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	3LCD
Contrast ratio (typical)	300:1
Screen size compatibility	34 - 200 \
Projector native resolution	SVGA (800x600)
Keystone correction, horizontal	20 °
Lamp type	UHP
Lamp power	150 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	2500 h
RMS rated power	0.8 W
Number of built-in speakers	1
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Power consumption (typical)	244 W
Power consumption (PowerSave)	169 W
Focus	Manual
Throw ratio	1.6 - 1.9:1
Focal length range	- mm
Aperture range (F-F)	1.6 - 1.8
HDCP	-
Noise level	- dB
Dot clock scanning frequency	100 MHz
Full HD	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	800 x 600 (SVGA)
USB connector type	USB Type-B
HDMI ports quantity	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Placement	Desktop
Product type	Standard throw projector
Product color	Black, White
Cables included	AC, VGA
Remote control type	IR

Weight and Dimensions

Depth	190 mm
Width	270 mm
Height	78 mm
Weight	2100 g