Sanyo PLC-SW30 User Manual

9
Overview
Top panel
POWER
LAMP
REPLACE
WARNING
INPUT
MENU
ON-OFF
SELECT
V
O
L
U
M
E
–
V
O
L
U
M
E
+
e
w
q
u y
t
r
i
i POWER indicator
Flashes red until the projector gets ready to be turned
on. It turns red when the projector is in the stand-by
mode. It remains green while the projector is in
operation. (
☞ P19,37,42 )
q POWER ON-OFF button
Turns the projector on or off. (
☞ P19 )
w SELECT button
– Executes the selected item. (
☞ P17 )
– Expands / compresses the image in Digital Zoom
mode. (
☞ P29 )
r MENU button
Opens or closes the On-Screen Menu. (
☞ P17 )
t INPUT button
Selects input source. (
☞ P22,P30 )
e Point
eedd
7 8 ( VOLUME
+ / –
)
buttons
– Select an item or adjust value in the On-Screen Menu.
(
☞ P17 )
– Pan the image in DIGITAL ZOOM +/– mode. (
☞ P29 )
– Adjust volume level. (Point
7 8 buttons) ( ☞ P21 )
y LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws
to an end. (
☞ P40 )
u WARNING indicator
Lights red when the projector is in the abnormal
condition. This indicator also flashes red when the
internal projector temperature goes up over the
operating range. (
☞ P42 )

Sanyo PLC-SW30 Specifications

General

Native aspect ratio	4:3
Projection distance	- m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 80 kHz
Projection technology	3LCD
Contrast ratio (typical)	300:1
Screen size compatibility	34 - 200 \
Projector native resolution	SVGA (800x600)
Keystone correction, horizontal	20 °
Lamp type	UHP
Lamp power	150 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	2500 h
RMS rated power	0.8 W
Number of built-in speakers	1
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Power consumption (typical)	244 W
Power consumption (PowerSave)	169 W
Focus	Manual
Throw ratio	1.6 - 1.9:1
Focal length range	- mm
Aperture range (F-F)	1.6 - 1.8
HDCP	-
Noise level	- dB
Dot clock scanning frequency	100 MHz
Full HD	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	800 x 600 (SVGA)
USB connector type	USB Type-B
HDMI ports quantity	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Placement	Desktop
Product type	Standard throw projector
Product color	Black, White
Cables included	AC, VGA
Remote control type	IR

Weight and Dimensions

Depth	190 mm
Width	270 mm
Height	78 mm
Weight	2100 g