126 Section 2H: Using Your Phone’s Voice Services
To erase all voice memos:
䊳
Select > Tools > Voice Services > Voice Memo >
Erase All >Yes.
– or –
Press , then select Erase All >Yes.
Setting Up Screen Call
This feature enables you to screen incoming calls by using a
recorded announcement, either one that is pre-recorded or one
that you record. You can also record the caller’s message into the
Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
䊳
When the phone rings or vibrates, press Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1. Select > Tools > Voice Services > Screen Call > Auto.
2. Select On and press .
3. Set the answering time by using numeric keys or by
pressing the navigation key up or down.
4. Press or OK (left softkey). (The icon is displayed on
the standby display.)
Tip: If a new caller’s message is waiting, appears on the display. The
memos recorded while activating “Screen Call”are shown with a “ ”or “
”icon in the list (“ ”: once played, “ ”: not played yet). To listen to the
message, see “Reviewing Voice Memos”on page 125.
Tip: While the caller’s message is being recorded, press to answer the
call, or press to stop recording and disconnect the call.
To Next Page
Loading...
Need help?
General
