40 Section 2A: Your Phone – The Basics
The display confirms that the number has been dialed when it
shows “Connecting...”.
To use speed dial for Sprint PCS Ready Link calls:
䊳
From standby mode, press the appropriate key and
then press . (See “Assigning Speed Dialing for
Sprint PCS Ready Link Entries”on page 172.) The display
confirms that the number has been dialed when it
shows “R-Link calling...”
Note: Speed dialing is not available when you are roaming; when you are
roaming off the Nationwide Sprint PCS Network, you must always dial using
11 digits (1 + area code + number).
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can use
either of the following abbreviated dialing features.
䢇
Ph.Book Match allows you to retrieve any desired number
saved in your Contacts by entering only the last three to six
digits of the number, and automatically dials the retrieved
number. (See “To activate the Ph. Book Match feature”on
page 71.)
䢇
Prependallows you to prepend predefined numbers (first
five or six digits) to the last four or five digits you enter, and
then automatically dials the number.
(See page 71 to register
a prepend number and activate the Prepend feature.)
To place a call using Ph.Book Match Abbreviated Dialing:
1. Enter the last three to six digits of a Contact’s phone
number.
2. Press or . If there is more than one matched
number in your Contacts list, the Abbrev. Dial list
appears.
To Next Page
Loading...
Need help?
General
