28 Section 2A: Your Phone – The Basics
䢇
Hard Pause to insert a hard pause. (See “Dialing and
Saving Phone Numbers With Pauses”on page 37.)
䢇
2-Sec. Pause to insert a two-second pause. (See “Dialing
and Saving Phone Numbers With Pauses”on page 37.)
䢇
Hyphen to insert a hyphen. (Hyphens are generally for
visual appeal only; they are not necessary when entering
numbers.)
Tip: To speed dial a phone number, press and hold the appropriate speed
dial key (locations 2-9). See “Assigning Speed Dial Numbers”on page 101.
Answering Calls
To answer an incoming call with the flip open:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press or to answer an incoming call.
(Depending on your phone’s settings, you may also
answer incoming calls by opening the phone or by
pressing any number key. See “Setting the Open/Close
Flip Option”on page 69 and “Setting Any Key Answer”on
page 70 for more information.)
To answer an incoming call with the flip closed:
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. When your phone rings or vibrates, press and hold the
Ready Link/Memo Button on the left side of the
phone. (The call will be answered in speakerphone
mode.)
– or –
Open the phone to use the earpiece.
Note: If the setting for Open Flip is set to “No Action,”opening the phone
will not answer the call.
To Next Page
Loading...
Need help?
General
