38 Section 2A: Your Phone – The Basics
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Press Options (right softkey) and select either Hard Pause
or 2-Sec. Pause. (Hard pauses are displayed as an “H”and
two-second pauses as a “T.”)
3. Enter additional numbers.
4. Press or to dial the number.
– or –
To save the number in your Contacts, select Options
(right softkey) > Save Phone#.
Note: When dialing a number with a hard pause, press to send the
next set of numbers.
Plus (+) Code Dialing
When placing international calls, you can use Plus Code
Dialing to automatically enter the international access code
for your location (for example, 011 for international calls
made from the United States). (This feature is subject to
network availability.)
To make a call using Plus Code Dialing:
1. Press and hold until a “+”appears on your phone
display.
2. Dial the country code and phone number you’re calling
and press or . (The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.)
Note:
Plus Code Dialing cannot be used when entering an address for
messaging. (See “Using SMS Text Messaging”on page 187 to send an SMS
Text message. See “Sending Sprint PCS Picture Mail”on page 144 to send a
picture.)
To Next Page
Loading...
Need help?
General
