Sanyo SPW-C366VH8 User Manual

7
7-7. Remote Controller Servicing Functions
The remote controller includes a number of servicing functions. Use these as needed for test runs and inspections.
List of Servicing Functions
Functions Description Button operation Reset operation Unit status
Test run
Operation with forced
thermostat ON
Press and hold the
button for 4
seconds or longer.
Press the
button.
Current operation is
maintained.
Sensor
temperature
display
Temperature display
from each sensor
Press and hold the and
buttons for 4 seconds or longer.
Servicing
check display
Alarm history display
Press and hold the and
buttons for 4 seconds or longer.
Simple
settings
Filter lifetime, operating
mode priority, central
control address, and
other settings
Press and hold the
and
buttons for 4 seconds or longer.
When settings
are made from a
remote controller,
the indoor unit
where that remote
controller is
connected stops.
Detailed
settings
System address, indoor
unit address, central
control address, and
other settings
Press and hold the
, and
buttons for 4 seconds or
longer.
Automatic
address
Automatic address
setting based on
command from the
wired remote controller
Press and hold the and the
timer operation buttons for 4
seconds or longer.
Automatic reset
Entire system
stops.
Address
change
Change of indoor unit
address
Press and hold the
and the
timer operation buttons for 4
seconds or longer.
Press the
button.
•
7-8. Test Run Function
Operates the unit with the thermostat forced ON.
<Procedure>
1
Press and hold the button for 4 seconds or
longer.
2
“Test” appears on the remote controller LCD
display (Fig. 7-3).
3
Start operation.
4
Press the button to return to normal remote
controller display.
Fig. 7-3
RCS-TM80BG
2
3
1
4
7-16
SM830160-03ClassicPAC-iA4.ind1616SM830160-03ClassicPAC-iA4.ind1616 2010/02/1610:30:522010/02/1610:30:52

Sanyo SPW-C366VH8 Specifications

General

Brand	Sanyo
Model	SPW-C366VH8
Category	Air Conditioner
Language	English