DATE AND TIME SETTING
The digital camera will record the date and time an image is captured so that
you can display them during playback. Therefore, before capturing images,
make sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 23, 2003
1
Display the Option Setting Mode
Screen (see page 103).
2
Select the clock set icon r, and
press the SET button.
œ The CLOCK SET menu appears.
œ The current date and time settings
appear.
œ Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
œ To return to the Option Setting Mode
Screen, press the MENU button, or
select “EXIT” and press the SET
button.
SET
MENU
DPOF
MENU button
Arrow button [j] [c]
SET button
Arrow button [d] [l]
CLOCK SET
OPERATION BEEP
HELP DISP
LANGUAGE
TV SYSTEM
REFORMAT
CLOCK SET
DATE
º
2003/08/01
TIME
º
00:00
DISP
º
Y/M/D
EXIT
SX714/EX, GX, U (VPC-S1 GB) Thu. July, 17/2003
105
English
To Next Page
Loading...
Need help?
General
