Description
BASO 1 MS - 02.03 - V02 Page 3-5
3.2.4 Water connection / outlet
If the machine is connected to a newly installed water supply line then please make
sure that the supply line and the connecting tube are rinsed carefully so that no dirt can
get into the machine.
The coffee machine must be connected to an installed drinking water supply line (with
water tap). The installation is done via the fitted pressure hose and the screwing G 1/2"
to the pressure reducer which is fitted directly on the water tap (adjust on 3 bar).
For the water outlet you have to connect a temperature resistant outlet hose to the
waste water metal blade and the syphon. Fix the same firmly on the outlet and make
sure that the water can flow out easily.
The ideal limestone of the water should not be higher than 6-8°dWH (German water
hardness measure) or 8-12°fWH (French water hardness measure). The chlorine con-
tent should not be higher than 100 mg per liter. Ideal ph-value = 7. Otherwise see the
local rules.
3.3 Equipment and accessories
3.3.1 Model variations
The Schaerer Ambiente 1 model is available in four different versions:
1 SO = Coffee only
1 SO Milk Smart = Coffee - and Milk products
1 SO Tee = Coffee and hot water
1 SO Tee-Simultan = Coffee and hot water simultaneous
15 SO = Coffee, hot water and steam
3.3.2 Standard accessories
Article Order No.
-1 User manual *
-1 Quick reference card *
-1 Chip card „CHEF“ 063930
-1 Chip card „ SAVE DATA“ 063933
-1 Spoon 067111
-1 Packing of cleaning tablets 065221
-2 Seal 064249
-1 Nippel (G1/2“) 068179
-1 Brush 067409
-1 Outlet hose 063353
-1 Main power cord CH or Euro-Norm 063260 or 063261
-1 reinforced hose 067766
To Next Page
Loading...
Need help?
General
