Operation
Page 4-2 BASO 1 MS - 02.04 - V02
4 Operation
4.1 Introduction
This chapter describes the basic functions of the coffee machine. Read them carefully to ensure
easy and problem-free routine operation.
Proper installation and programming of the coffee machine by an authorised service
technician are crucial for a smooth operation and good product quality.
• During product release, never move cups or other objects positioned below
the beverage outlet, the hot water outlet or the steam pipe! The beverages
delivered by the machine are hot! After having pressed the selection button,
keep hands and other body parts away from the outlets to prevent scalding!
• Never aim steam or hot water jets against persons!
• Do not touch the hot cup plate or the beverage outlets. Touch the hot water
outlet and the steam pipe only at the insulated handles.
• The coffee machine does not stop when a cup is removed from underneath
an outlet during serving.
• The beverages delivered by the coffee machine are hot! To protect yourself
against scalding, keep hands and other body parts away from the outlet area
during the preparation and delivery of beverages.
• Keep away from underneath the steam pipe while steam is delivered! Hold
the container in such a way that no liquid is spilled onto your hands or other
body parts during heating!
• The steam pipe is hot. Touch the steam pipe only at the rubber handle.
• When the boiling point is reached, the beverage may start to spill. During
steam delivery, ensure that the steam pipe remains immersed in the liquid.
• To avoid burns, touch the delivery mechanism on the insulated parts only.
Switch off the coffee machine if you accidentally pour liquid over the cup plate
(risk of short-circuit)!
Contact customer service representative immediately.
Environmental protection!
Noise emission levels can be up to 70 dB (A), particularly when heating up beverages.
4.2 Operating Modes
The control board is switched off. The coffee machine is still connected to the power
supply.
Display example
Your coffee machine is ready for operation. When a product button is pressed, the se-
lected beverage is delivered.
Display example
When switched on again, the machine will need a short time to reach the programmed
operating temperature.
<< Standby >>
12:00 01.01.2005
select product
12:00 01.01.2005
To Next Page
Loading...
Need help?
General
