Operation
Page 4-6 BASO 1 MS - 02.04 - V02
5. Place the container on a stable surface.
6. Clean the outside of the steam pipe with a wet and clean paper cloth.
7. Point the steam pipe towards the drip grid. Press the [ ] button twice in short
sequence to clean the inside of the steam pipe.
4.4.7 Preparing Cappuccino using the Milk Smart system
Insert the suction hose (1) into the milk container.
The height differential between the milk pack and the Cappuccinatore should not be
less than 40 cm.
Milk that has already been heated or which is past its use-by date cannot
produce any foam.
The beverages delivered by the coffee machine are hot! To protect yourself
against scalding, keep hands and other body parts away from the outlet area
during the preparation and delivery of beverages.
1. Put the cup underneath the outlet.
2. Press the desired product key.
The LED next to the pressed button illuminates. The following message appears
on the display:
3. The whole production process is now being done completely automatically.
select product
Pre select .. Serving ..
1