Operation
BASO 1 MS - 02.04 - V02 Page 4-9
4.7 Programming using standard chip cards
The CHEF and SAVE DATA cards are part of the standard delivery package. They
provide a simple means of changing settings or retrieving information from the cof-
fee machine.
For all the functions described in this chapter, it is assumed that the coffee ma-
chine is ready for routine operation in normal operating mode.
Keep the chip cards in a safe place where only authorized persons have access to
them.
When a chip card has been inserted, the [ ] button lights up and product selec-
tion is disabled.
4.7.1 CHEF card
The CHEF card enables the principal settings or modifications to be undertaken for routine
operation.
4.7.2 Menu overview
- Read daily counter for coffees and teas per key.
- Reset daily counter
- Read annual total for coffee and for each button
- Read monthly total for coffee and for tea
- Delete annual total
- Adjust quantity of product dispensed
- Change quantity of coffee ground
- Change on/off timer
- Change time
- Change date
- Change PIN code
At the end of every menu:
Remove CHEF card -> normal standby mode or press the
[
] button to go to the next menu.
4.7.3 Read daily counter for coffees and teas per key
1. Insert CHEF card into the card reader.
2. Press [ ] or [ ] button until the following menu is displayed:
3. Press the product buttons to read the counter values for each individual product in-
cluding those selected with the [ ] button.
4.7.4 Reset daily counter
1. Insert CHEF card into the card reader.
2. Press [
] or [ ] button until the following menu is displayed:
3. Press the [ ] button.
delete counter
execute `C`
daily counter …..
select product
= Displayed number shows the total of all delivered
coffee products
To Next Page
Loading...
Need help?
General
