Error messages and malfunctions
Page 6-2 BASO 1 MS - 02.06 - V02
6 Error messages and malfunctions
6.1 Display messages
Display Cause Rectification
manual cleaning
(sTxt-023)
- If you have removed the ground container,
the machine will prompt you, to do the
manual cleaning.
select product
12:00 01.05.2004
(sTxt-003, Fix)
- The machine is ready for dispensing. The
product buttons are ready for use (select).
The lower left corner indicates the time
(military) and the lower right hand corner
indicates the date (day. month. year).
select product
clean machine
(sTxt-003,sTxt,-171)
- The display prompts this message when
the machine has been dispensing a preset
(programmable) number of products with-
out a cleaning.
Products can still be served.
- The only way to clear this message from
the display is by initiating the cleaning pro-
gram.
select product
grinder left empty
(sTxt-003,sTxt,-178)
-This usually indicates that the left hopper is
empty.
-It may also mean that the bean flow into the
grinder is blocked (i.e. sticky beans, piece
of plastic).
Left coffee outlets are disabled
- If so, fill hopper with beans
(max. 1.8 lbs /
0.75 kg per container
) and press the [ ] /
STOP button to continue the grind cycle.
- So, if the hopper is full, stir the beans with
the back of the cleaning brush, then press
the
[ ] / STOP - button, if necessary two
or three times.
- If message persists, call for service.
select product
grinder right empty
(sTxt-003,sTxt-179)
-This usually indicates that the right hopper is
empty.
-It may also mean that the bean flow into the
grinder is blocked (i.e. sticky beans, piece
of plastic).
Right coffee outlets are disabled
- If so, fill hopper with beans
(max. 1.8 lbs /
0.75 kg per container
) and presss the [ ]
/
STOP button to continue the grind cycle.
- So, if the hopper is full, stir the beans with
the back of the cleaning brush, then press
the
[ ] / STOP - button, if necessary two
or three times.
- If message persists, call for service.
cleaning program
12:00 01.05.2004
(sTxt-021, Fix)
- This message appears during the quick
flush, initiated by pressing and holding the
cleaning button for 5 seconds.
cleaning program
remove container
(sTxt-021,sTxt,-022)
- When you first press the cleaning program
button to initiate the cleaning cycle, the
display prompts you to remove the grounds
bin. You need to do this immediately.