Operation
Page 4-12 BASO 1 MS - 02.04 - V02
Timer operation can be switched on or off with the PROGRAM card.
If the machine has switched off automatically, it can be switched on at any time
with the [ ] button. This interrupts the switching function until the next cycle.
The switching times are only active Monday - Friday. The machine is not switched
on automatically at the weekend.
4.7.11 Changing the time
1. Insert the CHEF card into the card reader.
2. Press the [
] or [ ] button until the following menu is displayed:
3. Press the [ ] button:
4. Use the [
] and [ ] buttons to set the hours.
5. Confirm with the [ ] button.
6. Repeat steps 4 and 5 to set the minutes and the seconds.
4.7.12 Changing the date
1. Insert the CHEF card into the card reader.
2. Press the [
] or [ ] button until the following menu is displayed:
3. Press the [ ] button:
4. Use the [
] and [ ] buttons to set the day.
5. Confirm with the [ ] button.
6. Repeat steps 4 and 5 to set the month and the year.
4.7.13 Changing the PIN code
1. Insert the CHEF card into the card reader.
2. Press the [
] or [ ] button until the following menu is displayed:
3. Press the [ ] button:
4. Use the [
] and [ ] buttons to set the first digit of the new PIN code.
5. Confirm with the [ ] button.
6. Repeat steps 4 and 5 for each digit until the PIN code has been entered fully.
Use the [ ] button to copy values that have already been set.
The PIN code function is only active if the machine has been programmed
accordingly.
The current PIN code is not displayed.
Press the top product button to re-enter the PIN code if you make a mistake.
PIN-code 0000
change PIN-code
execute `C`
change date
30.01.2005
change date
execute `C`
change time
12
:00:00
change time
execute `C`
To Next Page
Loading...
Need help?
General
