www.schaerer.com Product description
BASCJ_EN
V03 | 07.2015
10
Serial plate
The serial plate is located behind the drip tray on the left side
► In the event of a fault or warranty claim, specify the information on the serial plate.
Declaration of conformity
Manufacturer's address
Applied standards
The following harmonised standards have been applied:
The stated manufacturer declares herewith that this machine complies with all relevant stipu-
lations of the specified EU directives. In case of any modifications of the units that have not
been approved by Schaerer, this declaration is rendered invalid.
Manufacturer Documentation specialist
Schaerer AG
P.O.Box 336
Allmendweg 8
CH-4528 Zuchwil, Switzerland
T +41 (0)32 681 62 00
F +41 (0)32 681 64 04
info@schaerer.com
www.schaerer.com
Schaerer AG
Hans-Ulrich Hostettler
P.O. Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC
• EN 60335-1:2002 +A1 +A11 +A12 +A13
+A14 +A15 +A2
• EN 60335-2-75: 2004 +A1 +A11 +A2
+A12
• EN 62233:2008
• EN 55014-1:2006 +A1
• EN 55014-2:1997 +A1 +A2
• EN 61000-3-2:2006 +A1 +A2
• EN 61000-3-3:2008
Safety EMC
• IEC 60335-1:2001 +A1 +A2
• IEC 60335-2-14:2006 +A1
• IEC 60335-2-15:2002 +A1 +A2
• IEC 60335-2-75:2002 +A1 +A2
• IEC 62233 Ed1:2005
• CISPR 14-1 Ed 5.1: 2009
• CISPR 14-2 Ed 1.2: 2008
• IEC 61000-3-2 Ed 3.2: 2009
• IEC 61000-3-2 Ed2.1:2001
• IEC 61000-3-3:2008
To Next Page
Loading...
Need help?
General
