www.schaerer.com Operation
BASCJ_EN
V03 | 07.2015
18
Dispensing
Prewarming the cups
A storage area for cups is located on top of the coffee machine. When the machine is switched
on, the storage area is heated and the cups are prewarmed.
► Place the cups on the storage area.
The cups are pre-warmed when the coffee machine is switched on.
Adjusting the outlet height
Hot surfaces can cause burns.
Exercise care when moving the beverage outlet.
► Place a cup under the beverage outlet.
► Grasp the beverage outlet from the front and slide it into the correct position (see figure).
► Remove the cup after the beverage has been dispensed.
Beverages
The machine is ready to dispense a beverage when the beverage symbol appears.
► Place a cup under the beverage outlet.
► Adjust the height of the beverage outlet to the cup size.
The following beverages are available:
a Press briefly: espresso/press and hold: 2 espressos
b Press briefly: café creme/press and hold: 2 café cremes
c Press briefly: latte macchiato/press and hold: Milk coffee
d Press briefly: cappuccino/press and hold: 2 cappuccinos
e Outlet at the top, press briefly: hot milk/outlet at the bottom, press and hold: foam
► Press the desired beverage button.
Only the symbol of the selected beverage appears; dispensing of the beverage begins.
The beverage name appears on the display.
► Remove the cup after the beverage has been dispensed.
Adjustable height = 70 – 135 mm.
See "Dispensing options" - "Stop dispensing" to stop dispensing of the beverage.
To Next Page
Loading...
Need help?
General
