www.schaerer.com Liability
BASCJ_EN
V03 | 07.2015
54
Liability
Operator responsibilities
The operator must ensure that the machine undergoes regular maintenance and that the safe-
ty devices are checked regularly by a Schaerer AG service partner, a representative thereof,
or other authorised persons.
Schaerer AG must be notified in writing of any defects within 30 days. For hidden defects, this
period is extended to 12 months from the date of installation (work report, handover report),
but no longer than 18 months after the product leaves the factory in Zuchwil.
Safety-relevant parts such as safety valves, safety thermostats, boilers etc. must not be re-
paired in any circumstances. They may only be replaced.
The following intervals apply:
• Safety valves: every 24 months.
• Boilers (steam boilers, flow heaters): every 72 months.
These measures are performed by a Schaerer AG service technician or your service partner
as part of the maintenance routine.
When using additional products it is the responsibility of the operator to provide information on
any properties which may trigger an allergic reaction.
Warranty and liability
No responsibility will be taken for warranty or liability claims in the event of personal injury or
material damage as a result of one or more of the following causes:
• Improper use of the device.
• Improper mounting, commissioning, operation, cleaning and maintenance of the device
and the associated optional devices.
• Failure to observe maintenance intervals.
• Operating the unit with defective safety devices or safety and protective equipment that is
not properly installed or is not functional.
• Failure to observe the safety notes in the operating instructions pertaining to storage, in-
stallation, commissioning, operation and maintenance of the machine.
• Operating the device when it is not in perfect condition.
• Repairs carried out improperly.
• Use of spare parts that are not original Schaerer AG spare parts.
• Use of cleaning products that are not recommended by Schaerer AG.
• Catastrophic incidents due to foreign objects, accidents, vandalism or force majeure.
• Penetrating the device with any type of object or opening the housing.
The manufacturer assumes the warranty with respect to any liability claims only and exclusive-
ly if the specified maintenance and service intervals are adhered to and if original spare parts
were used that were ordered from the manufacturer or another authorised supplier.
The "General Terms and Conditions" of Schaerer AG apply.
To Previous Page
Loading...
Need help?
General
