BASCJ_EN
V03 | 07.2015
35
www.schaerer.comService and maintenance
► Slide the drinking water tank back into the machine.
► Place a large container (min. 3 l) under the beverage and hot water outlet.
► Start descaling with the button.
The descaling process begins.
The remaining descaling time is shown on the display.
After approx. 30 min, the request to empty the drinking water tank appears on the display.
► Empty the drinking water tank and rinse it thoroughly.
► Confirm display instruction with the button.
► Fill the drinking water tank with fresh water and slide it back into the machine.
► Confirm display instruction with the button.
The descaling process is continued.
The remaining descaling time is shown on the display.
Option 1: With filter in the water tank
► Reinstall the water filter, including the outlet connector.
Option 2: With mains water supply/with no filter in the water tank
► Reinsert the water outlet screen.
► Reconnect the mains water supply if present.
Setting the grind level
The grinding level is influenced by wear on the grinding discs. The grinding level needs to be
adjusted as necessary to achieve constant grinding quality.
Danger of injury from the rotating grinding discs in the grinder.
Never reach into the bean hopper while the coffee machine is switched on.
CAUTION!
Risk of machine
damage!
If the grind level is set while the grinder is idle, the grinder can be set too firmly and may
not start as a result.
The grinder must always be running while it is being adjusted.
► Open the bean hopper lid.
► Place the multitool onto the grind level adjuster (see figure).
► Press the beverage button (e.g. espresso) and wait for the grinder to start running.
Option 1: Finer setting of grind level
► Press the multitool down and turn anticlockwise.
Option 2: Coarser setting of grind level
► Press the multitool down and turn clockwise.
Water filter (Option)
Installing the water filter for the internal drinking water tank (Option)
The "Filter for the internal drinking water tank" initial installation set can be obtained from
Schaerer AG if the water quality is insufficient (order number: 071398).
Recommendation: After the descaling process is completed, dispense a test beverage and
pour it away.
Read the previous chapter entitled "Water quality".
To Next Page
Loading...
Need help?
General
