BASCJ_EN
V03 | 07.2015
43
www.schaerer.comProgramming
Counters
In the "counters" menu, the dispensing counter for all beverages can be viewed and cleared.
► Navigate to the "counters" menu in the programming.
► Press the button.
► Select the beverage you wish to set.
The first menu item appears.
Water tank yes/no Under this menu item, you define whether a nor-
mal drinking water tank or the mains water sup-
ply option is being used.
► Set the use of a water filter to "yes" or "no"
using the button and button.
► Press the button to exit the setting.
Yes = drinking
water tank
No = mains wa-
ter supply
This parameter is availa-
ble as of software versi-
on 0.10.
Brewing temperature: 92°C This menu item can be used to set the brewing
water temperature.
► Set the temperature using the button and
button.
► Press the button to exit the setting.
60 – 95°C Recommendation: 92°C
Factory setting Activating the factory setting resets all program-
ming settings to the factory setting.
► Set the factory setting to "yes" or "no" using
the button and button.
► Press the button to exit the setting.
The "yes" setting resets all settings to the
factory settings.
Yes/No –
display contrast This menu item can be used to set the display
contrast.
► Set the contrast using the button and
button.
The contrast changes simultaneously.
► Press the button to exit the setting.
Lighter + softer/
darker + shar-
per
–
Change PIN The PIN for changing settings and clearing the
counters can be changed individually.
► Set the PIN using the beverage buttons.
a= 1
b= 2
c= 3
d= 4
e= 5
f= 0
5-digit PIN
The numbers 0
to 5 are availab-
le
Default PIN = 00002
Menu option (display text) Description Setting range Notes
To Next Page
Loading...
Need help?
General
