Sharp ER-A421 User Manual

168
■
EURO change
You can program optional functions for EURO change. For the details, refer to EURO Migration Function
section.
Procedure
Program each item as follows:
• DATE (Use the numeric entry)
Preset the date to execute the automatic EURO modifi cation
operation.
Enter the day (2 digits), month (2 digits), and year (2 digits) in
this sequence.
• TIME (Use the numeric entry)
Preset the time of the date to execute the automatic EURO modifi cation operation.
Enter the hour (00-23)
• PRICE CONVERT (Use the selective entry)
YES: Converts the preset unit prices of Dept./PLU/EAN in the automatic EURO modifi cation operation.
NO: Does not convert the preset unit prices of Dept./PLU/EAN to the ones of EURO currency in the
automatic EURO modifi cation operation.
NOTE
The preset rate of the Exchange 1 is applied as the conversion rate, and the calculation method
is set to “division”.
• EURO JOB (Use the selective entry)
NON-COMPUL.: Non-compulsory the automatic EURO modifi cation operation in the X2/Z2 mode after
the preset date.
COMPULSORY: Compulsory the automatic EURO modifi cation operation in the X2/Z2 mode after the
preset date.
NOTE
When the EURO STATUS of your register is already “D” (i.e. the domestic currency has been
changed to EURO in your register), this programming is disabled.

Sharp ER-A421 Specifications

General

Memory type	Flash ROM
Types of payment	Cash
Electronic journal	Yes
Compatible memory cards	SD
Keyboard number of keys	119
Number of clerks/departments	99
Number of programmable VAT rates	6
Number of Price Look-Up codes (PLUs)	20000 PLUs
Supported paper width	58 mm
Display digits	24 digits
Display number of lines	10 lines
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	424 mm
Width	355 mm
Height	305 mm
Weight	12000 g