SICK PowerProx WTT12L User Manual

1 General safety notes
1.1 Safety notes
■
Read the operating instructions before commissioning.
■
Connection, mounting, and configuration may only be performed by trained spe‐
cialists.
■
Not a safety component in accordance with the EU Machinery Directive.
■
UL: Only for use in applications in accordance with NFPA 79. These devices must
be fused with a 1 A fuse that is suitable for 30 VDC. UL-listed adapters with
connecting cables are available.
■
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
the sensor.
EN/IEC 60825-1:2014
IEC60825-1:2007
Laser
1
Maximale Pulsleistung: < 250 mW
Impulsdauer: 4 ns
Wellenlänge: 658 nm
Entspricht 21 CFR 1040.10
und 1040.11 mit Ausnahme von
Abweichungen nach
Laser-Hinweis 50, 24. Juni 2007
LASERKLASSE 1
ATTENTION
WARNING: Interruption, manipulation or incorrect use can lead to hazardous exposure
due to laser radiation.
The device must be supplied by a Class 2 source of supply.
UL Environmental Rating: Enclosure type 1
2 Product description
2.1 Correct use
The WTT12L is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
in the following) for the optical, non-contact detection of objects. If the product is used
for any other purpose or modified in any way, any warranty claim against SICK AG shall
become void.
1 GENERAL SAFETY NOTES
4
8018110.1BVZ / 2021-05-18 | SICK
Subject to change without notice

SICK PowerProx WTT12L Specifications

General

Brand	SICK
Model	PowerProx WTT12L
Category	Accessories
Language	English