8-9
TP27, TP37 Equipment Manual
Release 01/00
Step Action
1 Touch the Recipe field of the standard screen Data Record
Processing and Transmission.
Select the recipe for the new data record in the selection window.
2 Touch the Data Medium field.
Select from the selection window the data medium on which you
want to save the new data record.
3 Touch the Data Record Name field.
Enter the name of a data record, which does not yet exist, in the
input window . To save the data record on a disk, the name may
only consist of alpha characters and digits from the normal level of
the alphanumeric keyboard. The length is limited to 11 characters.
4 Edit the data record and then download it to the data medium.
Step Action
1 Touch the Recipe field in the standard screen Data Record
Processing and Transmission.
Select the recipe for the data record to be edited from the selection
window.
2 Touch the Data Medium field.
Select the data medium from the selection window on which the
edited data record should be saved .
3 Select the name of the data record which you which to edit. There
are two ways of doing this:
S Touch the button
and select the data record from the selection window or
S Touch the Data Record Name field and enter the name of the
data record in the input window.
4 Touch the button
5 Edit the data record in the edit window (figure 8-4).
6
Confirm the change by touching
or discard the change by touching
ESC
Creating a new
data record
Editing a data
record
Recipes
To Next Page
Loading...
Need help?
General
