Siemens SIMOTICS XP User Manual

Maintenance
9.3 Corrective maintenance
1MB..1/2/3/4 - shaft heights 63 ... 355
130 Operating Instructions, 06/2020, A5E44455710A
9.3.13 O-ring seal
If O-ring seals are present, you should check that they are in perfect condition and that the
O-ring seals are properly seated in the grooves between the components. Replace damaged
O-ring seals.
O-ring seals can be present on the following components, for instance:
● Adapters, tapers
● Entries, glands
● Bearing seals
● End shield seals
● Terminal box sealing
● etc.

Siemens SIMOTICS XP Specifications

General

Brand	Siemens
Model	SIMOTICS XP
Category	Engine
Language	English