1MB..1/2/3/4 - shaft heights 63 ... 355
Operating Instructions, 06/2020, A5E44455710A
131
10.1 Parts order
In addition to the exact part designation, please specify the machine type and the serial
number of the machine in all orders for spare parts and repair parts. Ensure that the part
designation is the same as that in the parts list, and make sure you also use the associated
part number.
When spare and repair parts are ordered, the following details must be provided:
● Designation and part number
● Order number and serial number of the machine
The machine type and serial number can be found on the rating plate.
See also
Spares On Web (https://www.sow.siemens.com/)
10.2 Data matrix code on the machine
Data matrix code
A data matrix code may be provided on machines manufactured in Europe. You can retrieve
the following information from the data matrix code:
● Machine type
● Serial number
● Customer material number, if ordered as option Y84
● Using the Data Matrix code and the App "SIMOTICS Digital Data", you can access the
technical data, spare parts and operating instructions for your motor.
10.3 Ordering data
Note
The graphical representations in this chapter show schematic diagrams of the basic
versions. They are used for spare parts definitions. The supplied version may differ in details
from these representations.
To Next Page
Loading...
Need help?
General