17
GB
9.8 Setting the speed
Turn the speed controller 18 to set the
speed:
- The speed can be adjusted in 10 incre-
ments:
- Speed 1 - 4: for the mixer attach-
ment31;
- Speed 1 - 10: for the blade assem-
bly29.
CAUTION:
~
The mixer attachment
31
must
only be used with speed settings
1 to 4. On the display
27
, a re-
spective indication appears.
~ When mixing liquids at speed 10, the
blender jug5 must not contain more
than 1 litre, since otherwise liquid might
be ejected (see “Using the blender jug”
on page 19). For speed settings of less
than 10, the blender jug5 may only be
filled up to a maximum of 2.2 litres.
- For further notes: see “Functions in an
overview” on page 6.
- The speed set is shown on the dis-
play27.
- During operation, the speed setting can
be changed.
- The speed cannot be set in the pro-
gram .
- If during operation you change the
speed to 0, the device will stop. To con-
tinue working, select a speed and press
the button START/STOP19.
- If a temperature has been selected, only
the speed settings 1 - 3 are available.
Soft start
In order to avoid that during sudden acceler-
ation of hot food liquid is ejected from the
blender jug5 or the device starts wobbling,
a soft start is provided for all settings except
for the turbo function:
- Soft start for food temperatures exceed-
ing 60 °C.
9.9 Anti-clockwise
rotation
The anti-clockwise rotation is used for gentle
stirring of food not to be chopped.
- By pressing button 21 the direc-
tion of rotation of the blade assem-
bly29 can be changed in standard
operation at any time.
- The anti-clockwise rotation can only be
applied at low speed settings 1 to 3.
- For programmes and ,
the anti-clockwise rotation is controlled
by the programme.
• Press 21 to activate the anti-clock-
wise rotation.
• Press 21 again to deactivate the
anti-clockwise rotation.
__317553_MC_plus_GR_CY.book Seite 17 Freitag, 12. April 2019 10:00 10
To Next Page
Loading...
Need help?
General
