26
GB
11.6 Overheating protection
The device has an overheating protection
system. As soon as there is no water left in
the blender jug5 thus causing the device to
become too hot, the device will automatical-
ly switch off.
In this case, pull out the mains plug7 and al-
low the device to cool.
You may then fill in water and put the device
back into operation.
12. Tips on steaming
Steaming is one of the healthiest methods of
cooking food. Not only nutrients and colour
of the food are maintained to the largest ex-
tent possible but also the natural flavour and
texture are the gourmet’s delight. Thus, it is
possible to use salt, fat and spices sparingly.
12.1 Using steamer inserts
As required, you can either use only the
deep steamer basket3 or both steamer bas-
kets (2 and3).
The shallow steamer basket2 cannot be
used without the deep steamer basket3.
12.2 Preparing menus
If you prepare a whole menu and therefore
use both steamer inserts on top of one anoth-
er, please make sure that:
- Meat and fish should always be cooked
in the bottom steamer basket3, so that
dripping juice will not come into contact
with other food;
- The food with the most weight to be
cooked should possibly be cooked in
the bottom steamer basket3.
13. Kneading
The appliance can be used to process up to
max. 500g of flour. The programme is only
operated with the blade assembly29.
13.1 General programme
information
- Preset time: 1:30 minutes (adjustable)
- Maximum time: 3 minutes
- Preset temperature: 0 °C (fixed)
- Preset speed: 4 (fixed)
- Clockwise/anti-clockwise rotation: is
controlled by the programme
13.2 Starting the program
1. Fill the dough quantity into the blender
jug5.
2. Close the blender jug5 with the lid34.
3. Use the main switch6 to switch on the
device.
4. Press the button 24. The button
24 lights up and the pro-
gramme values are shown on the dis-
play27.
5. Press the flashing button START/
STOP19.
The programme is started. The time set
is counted down on the display27. The
button 24 lights up. The pro-
gramme controls the clockwise/anti-
clockwise rotation automatically.
__317553_MC_plus_GR_CY.book Seite 26 Freitag, 12. April 2019 10:00 10