30
GB
15.5 Cleaning, checking and
replacing the spatula
The spatula32 is provided with a detacha-
ble silicone scraper.
For cleaning, remove the silicone scraper,
and check it for damage. Pay attention to
changes (e.g. porous material or tears).
- Both parts can be cleaned in the dish-
washer.
- A new silicone scraper can be reor-
dered (see “How to order accessories”
on page 36).
15.6 Descaling
When steaming with hard water, limescale
may build up on the parts used, especially
in the blender jug5.
Normal cleaning
In most cases, the limescale deposits are re-
moved by cleaning in the dishwasher or by
hand.
Slight limescale deposits
1. Remove slight limescale deposits, which
cannot be removed with normal clean-
ing by hand or in the dishwasher, with
a cloth on which you put some house-
hold vinegar.
2. Rinse with clear water.
Major limescale deposits
CAUTION:
~ Do not use commercially available des-
caling agent, not even glacial acetic
acid or vinegar essence. Use the follow-
ing gentle method.
1. Prepare a mixture of 50 % white house-
hold vinegar and 50 % boiling water.
2. Fill this mixture into the blender jug5 or
put other furred-up parts into a contain-
er with this mixture.
3. Allow the mixture to react for 30 minutes.
NOTE: more extended reaction periods do
not improve the limescale deposits but may
damage the parts permanently.
4. Rinse with clear water.
5. Allow the parts to dry completely before
using them again.
15.7 Storage
• Store the device protected against dust
and dirt and out of the reach of chil-
dren.
__317553_MC_plus_GR_CY.book Seite 30 Freitag, 12. April 2019 10:00 10
To Next Page
Loading...
Need help?
General
