18
GB
9.10 Turbo function
CAUTION:
~ When mixing liquids, the blender jug5
must not contain more than 1 litre, since
otherwise liquid might be ejected.
~ Never use this function when the mixer
attachment31 is used.
With the turbo function you can briefly select
speed setting 10 (maximum). This, for exam-
ple, is used to quickly chop nuts, small
amounts of herbs or onions.
- TURBO20 lit white: the function is
possible.
- TURBO20 lit red: the button is
blocked, the function is disabled (e.g.
because the food temperature inside the
blender jug exceeds 60 °C).
NOTE: if you nevertheless press
the button TURBO20, a signal
will sound and the display27
will show the symbol on the right.
• Press and keep button TURBO20
pressed for as long as you need the
function.
NOTES:
• The turbo function will only work
- if the blade assembly29 is not turn-
ing.
- if the food temperature in the blender
jug5 is less than 60 °C.
• The speed is promptly increased to set-
ting 10 (maximum).
9.11 Overflow
In the holder of the blender jug9 there is an
overflow hole11.
Should liquid escape from the blender
jug5, this will not collect in the base
unit13, but can escape via the overflow
hole11 onto the surface.
9.12 Starting and stopping
the device
• After setting one or more values or a
programme, start the device by pressing
button START/STOP19.
• By pressing button START/STOP19
again, you abort an ongoing cooking
or processing process.
__317553_MC_plus_GR_CY.book Seite 18 Freitag, 12. April 2019 10:00 10