19
GB
10. Using the blender
jug
NOTE: these user instructions describe the
basic functions such as mixing, chopping
and steaming. For information on the prepa-
ration of special dishes refer to the recipe
book.
10.1 Removing the blender
jug
The blender jug5 can only be removed if
the lid34 was opened.
1. Turn the lid34 anticlockwise, until the
arrow of the locking system12 points
to the open lock symbol.
2. Lift the blender jug5 vertically upwards
out of the socket for the blender jug9.
10.2 Markings inside the
blender jug
On the inside, the blender jug5 is provided
with markings regarding the filling volume:
- Bottom marking: approx. 0.5 litres
- Marking I: approx. 1 litre
- Centre marking: approx. 1.5 litres
- Marking II: approx. 2 litres
-Top marking
MAX
: approx. 2.2 litres
corresponding to the maximum admissi-
ble filling volume
CAUTION:
~ When mixing liquids at speed 10 or
with button TURBO20, the blender
jug5 must not contain more than 1 litre,
since otherwise liquid may be ejected.
For speed settings of less than 10, the
blender jug5 may only be filled up to a
maximum of 2.2 litres.
NOTE: For some applications, the blender
jug5 should not contain an insufficient
amount of liquid, so that the device can func-
tion properly. Thus, for whipping cream, for
instance, you should use at least 200 ml and
when beating egg white use at least two
eggs.
10.3 Using and removing the
blade assembly
The blade assembly29 is used to chop
food.
The blender jug5 must never be used with-
out the blade assembly29, since the blade
assembly29 seals the blender jug5 on the
bottom.
DANGER! Risk of injury from
cutting!
~ Please remember that the blades of the
blade assembly29 are very sharp.
Never touch the blades with your bare
hands, to avoid cuts.
__317553_MC_plus_GR_CY.book Seite 19 Freitag, 12. April 2019 10:00 10
To Next Page
Loading...
Need help?
General
