7 - 13
7 Transmission Repair
7B Eaton 750 / 751
9. With a floor jack supporting transaxle, remove the
hardware securing the front transaxle support to trac-
tor frame.
10. Remove the capscrews holding the axle supports to
side frames.
Figure B–10. Remove Mounting Bolts
Figure B–11. Lower Transaxle From Frame
11. Slowly lower the transaxle from tractor just enough to
do the following:
• Remove hydro drive belt from transaxle drive pulley
and fan.
• Expose and remove the oil return hose from the fit-
ting on top of transaxle.
• Remove the cotter pin and washer holding the
brake rod to brake lever. Remove the rod and
lower transaxle to ground.
12. Remove the following from the transaxle:
• Brake bracket assembly
• Cooling fan
• Hydro drive pulley
• Front transaxle support
• Hydro cam
• Neutral return cam
• Neutral detent support assembly
Figure B–12. Remove External Components
A
A. Oil Return Line B. Brake Lever
B
To Next Page
Loading...
Need help?
General
