Smartgen APC715 User Manual

APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 21 of 62
No.
Type
Description
initiate a warning alarm.
14
Low Oil Pressure
When the controller detects that the oil pressure has
fallen below the pre-set value, it will initiate a warning
alarm.
15
Level Sensor Open
When the controller detects that the level sensor is
open circuit and the action select “Warn”, it will initiate a
warning alarm.
16
Low Fuel Level
When the controller detects that the fuel level has fallen
below the pre-set value, it will initiate a warning alarm.
17
Flexible Sensor
1~6 Open
When the controller detects that the sensor is open
circuit and the action select “Warn”, it will initiate a
warning alarm.
18
Flexible Sensor
1~6 High
When the controller detects the sensor value is higher
than the max. set value, it will initiate a warning alarm.
19
Flexible Sensor
1~6 Low
When the controller detects the sensor value is lower
than the min. set value, it will initiate a warning alarm.
20
Digital Input 1~9
Warn
When the action of digital input port select “Warn” and
active, it will initiate a warning alarm.
21
Battery 2 Over
Voltage
When the controller detects that battery 2 voltage has
exceeded the pre-set value, it will initiate a warning
alarm.
22
Battery 2 Under
Voltage
When the controller detects that battery 2 voltage has
fallen below the pre-set value, it will initiate a warning
alarm.
23
Outlet Pressure
Sensor Open
When the controller detects that the outlet pressure
sensor is open circuit and the action select “Warn”, it
will initiate a warning alarm.
24
Outlet Pressure
Sensor High
When the controller detects the sensor value is higher
than the max. set value, it will initiate a warning alarm.
25
Outlet Pressure
Sensor Low
When the controller detects the sensor value is lower
than the min. set value, it will initiate a warning alarm.
26
Over Flow Warn
When the controller detects the flow value is higher
than the max. set value, it will initiate a warning alarm.
27
Gearbox Over
speed
When the controller detects that the gearbox speed has
exceeded the pre-set value, it will initiate a warning
alarm.
28
Gearbox Under
speed
When the controller detects that the gearbox speed has
fallen below the pre-set value, it will initiate a warning
alarm.
29
End Of The
Mandate
When the mandate time has expired and the action
select “Warn”, it will initiate a warning alarm.

Smartgen APC715 Specifications

General

Brand	Smartgen
Model	APC715
Category	Control Unit
Language	English