APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 6 of 62
1 OVERVIEW
APC715 Pump Unit Controller is designed for pump systems which controlled by
engine. It allows automatic start/stop, data measurement, alarm protection as well as
remote control, remote measurement and remote communication function. It fit with
LCD display, optional languages interface, and it is reliable and easy to use.
Utilizing the GOV (Engine Speed Governor) control function, the controller is able to
stabilize the outlet pressure via GOV.
APC715 Pump Unit Controller also monitors the engine, indicating the operational
status and fault conditions accurately. When abnormal condition occurs, it can protect
the unit automatically; simultaneously the exact failure mode information is indicated
by the LCD display on the front panel. SAE J1939 interface enables the controller to
communicate with various ECU (ENGINE CONTROL UNIT) which fitted with J1939
interface.
APC715 Pump Unit Controller adopt powerful 32-bit microprocessor technology with
precision parameters measuring, fixed value adjustment, time setting and set value
adjusting and etc. The majority of parameters can be configured from front panel and
all the parameters can be set using PC (via USB port) and can be adjusted and
monitored with the help of RS485 ports. It can be widely used in a number of pump
control system with compact structure, simple connections and high reliability
To Next Page
Loading...
Need help?
General
