Smartgen APC715 User Manual

APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 57 of 62
12.14 PERKINS
It is suitable for ADEM3/ ADEM4 engine control module. Engine type is 2306, 2506,
1106, and 2806.
Terminals of controller
Connector
Remark
Fuel relay output
1,10,15,33,34
Start relay output
-
Connect to starter coil directly
CAN GND
-
CAN communication shielding
line(connect with controller’s
terminal only)
CAN(H)
31
Impedance 120Ω connecting
line is recommended.
CAN(L)
32
Impedance 120Ω connecting
line is recommended.
Engine type: Perkins
12.15 SCANIA
It is suitable for S6 engine control module. Engine type is DC9, DC12, and DC16.
Terminals of controller
B1 connector
Remark
Fuel relay output
3
Start relay output
-
Connect to starter coil directly
CAN GND
-
CAN communication shielding
line(connect with controller’s
terminal only)
CAN(H)
9
Impedance 120Ω connecting
line is recommended.
CAN(L)
10
Impedance 120Ω connecting
line is recommended.
Engine type: Scania

Smartgen APC715 Specifications

General

Brand	Smartgen
Model	APC715
Category	Control Unit
Language	English