Smartgen APC715 User Manual

APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 37 of 62
7.2 PROGRAMMABLE OUTPUT 1-5 (TABLE 2)
No.
Type
Description
0
Not Used
1
Custom Period 1
Details of function description please
see the following.
2
Custom Period 2
3
Custom Period 3
4
Custom Period 4
5
Custom Period 5
6
Custom Period 6
7
Custom Combined 1
8
Custom Combined 2
9
Custom Combined 3
10
Custom Combined 4
11
Custom Combined 5
12
Custom Combined 6
13
Reserved
14
Reserved
15
Reserved
16
Reserved
17
Air Flap
Action when over speed shutdown and
emergence stop. It can close the air
inflow to stop the engine as soon as
possible.
18
Audible Alarm
Action when warning or shutdown
occurs. Can be connected annunciator
externally. When “alarm mute” input port
is active, the alarm will be prohibit.
19
Louver Control
Action in genset starting and disconnect
when genset stopped completely.
20
Fuel Pump Control
It is controlled by fuel pump of level
sensor’s limited threshold.
21
Heater Control
It is controlled by heating of temperature
sensor’s limited threshold.
22
Cooler Control
It is controlled by cooler of temperature
sensor’s limited threshold.
23
Oil Pre-supply
Actions in period of cranking to safety
run.
24
Reserved
25
Pre-Lubricate
Actions in period of pre-heating to safety
run.
26
Remote PC Output
This port is controlled by RS485
communication (PC).
27
Reserved

Smartgen APC715 Specifications

General

Brand	Smartgen
Model	APC715
Category	Control Unit
Language	English