APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 43 of 62
7.3 DEFINED CONTENTS OF CONFIGURABLE INPUT PORTS
(ALL ACTIVE WHEN CONNECT TO GRAND (B-))
Including following functions,
Indication: indicate only, not warning or shutdown.
Warning: warn only, not shutdown.
Shutdown: alarm and shutdown immediately
Never: input inactive.
Always: input is active all the time.
From crank: detecting as soon as start.
From safety on: detecting after safety on run delay.
Can prohibit “Audible Alarm” output when input is
active.
Can reset shutdown alarm when input is active.
All LED indicators are illuminating when input is
active.
All buttons in panel is inactive except
and there is in the left of first
row in LCD when input is active.
Under speed protection is inactive.
In Auto mode, during pump unit normal running,
when input is active, inhibit pump unit shutdown
automatically.
In Auto mode, inhibit pump unit start automatically
when input is active.
In Auto mode, inhibit pump unit scheduled run
when input is active.
Connect to Aux. Points of clutch.
Prohibit pump unit onload when input is active.
All shutdown alarms are prohibited except
emergence stop.(Means battle mode)
All outputs are prohibited in this mode.
To Next Page
Loading...
Need help?
General
