Smartgen APC715 User Manual

APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 56 of 62
12.12 MTU ADEC(SMART MODULE)
It is suitable for MTU engine with ADEC (ECU8) and SMART module.
Terminals of controller
ADEC (X1port)
Remark
Fuel relay output
X1 10
X1 Terminal 9 Connected to
negative of battery
Start relay output
X1 34
X1 Terminal 33 Connected to
negative of battery
Terminals of controller
SMART (X4 port)
Remark
CAN GND
X4 3
CAN communication shielding
line(connect to controller’s this
terminal only)
CAN(H)
X4 1
Impedance 120Ω connecting
line is recommended.
CAN(L)
X4 2
Impedance 120Ω connecting
line is recommended.
Engine type: MTU-ADEC
12.13 MTU ADEC(SAM MODULE)
It is suitable for MTU engine with ADEC (ECU7) and SAM module.
Terminals of controller
ADEC (X1port)
Remark
Fuel relay output
X1 43
X1 Terminal 28 Connected to
negative of battery
Start relay output
X1 37
X1 Terminal 22 Connected to
negative of battery
Terminals of controller
SAM (X23 port)
Remark
CAN GND
X23 3
CAN communication shielding
line(connect with controller’s
this terminal only)
CAN(H)
X23 2
Impedance 120Ω connecting
line is recommended.
CAN(L)
X23 1
Impedance 120Ω connecting
line is recommended.
Engine type: Common J1939

Smartgen APC715 Specifications

General

Brand	Smartgen
Model	APC715
Category	Control Unit
Language	English