Smartgen APC715 User Manual

APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 23 of 62
NO.
Type
Description
16
Flexible Sensor
1~6 High
When the controller detects the sensor value is higher
than the max. set value, it will initiate a shutdown
alarm.
17
Flexible Sensor
1~6 Low
When the controller detects the sensor value is lower
than the min. set value, it will initiate a shutdown alarm.
18
Digital Input 1~9
Shutdown
When the action of digital input port select “Shutdown”
and active, it will initiate a shutdown alarm.
19
Outlet Pressure
Sensor Open
When the controller detects that the outlet pressure
sensor is open circuit and the action select “Shutdown”,
it will initiate a shutdown alarm.
20
Outlet Pressure
Sensor High
When the controller detects the sensor value is higher
than the max. set value, it will initiate a shutdown
alarm.
21
Outlet Pressure
Sensor Low
When the controller detects the sensor value is lower
than the min. set value, it will initiate a shutdown alarm.
22
Over Flow
Shutdown
When the controller detects the flow value is higher
than the max. set value, it will initiate a shutdown
alarm.
23
Gearbox Over
speed
When the controller detects that the gearbox speed has
exceeded the pre-set value, it will initiate a shutdown
alarm.
24
Gearbox Under
speed
When the controller detects that the gearbox speed has
fallen below the pre-set value, it will initiate a shutdown
alarm.
25
End Of The
Mandate
When the mandate time has expired and the action
select “Shutdown”, it will initiate a shutdown alarm.

Smartgen APC715 Specifications

General

Brand	Smartgen
Model	APC715
Category	Control Unit
Language	English