C
ONFIGURING
THE
S
WITCH
3-84
• Ethernet Type – This option can only be used to filter Ethernet II
formatted packets. (Range: 0-65535)
A detailed listing of Ethernet protocol types can be found in RFC
1060. A few of the more common types include 0800 (IP), 0806 (ARP),
8137 (IPX).
Web – Specify the action (i.e., Permit or Deny). Specify the source and/or
destination addresses. Select the address type (Any, Host, or MAC). If you
select “Host,” enter a specific address (e.g., 11-22-33-44-55-66). If you
select “MAC,” enter a base address and a hexidecimal bitmask for an
address range. Set any other required criteria, such as VID or Ethernet
type. Then click Add.
Figure 3-38 ACL Configuration - MAC
CLI – This rule permits packets from any source MAC address to the
destination address 00-e0-29-94-34-de where the Ethernet type is 0800.
Console(config-mac-acl)#permit any host 00-e0-29-94-34-de
ethertype 0800 4-130
Console(config-mac-acl)#
To Next Page
Loading...
Need help?
General
