IP I
NTERFACE
C
OMMANDS
4-251
ip default-gateway
This command establishes a static route between this switch and devices
that exist on another network segment. Use the no form to remove the
static route.
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a
different IP segment.
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (4-253)
ip dhcp restart
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#ip default-gateway 10.1.1.254
Console(config)#
To Next Page
Loading...
Need help?
General
