SMC Networks 6726AL2 User Manual

C OMMAND L INE I NTERFACE
4-156
Table 4-41 Interfaces Switchport Statistics
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled;
if enabled it also shows the threshold level (page 4-150).
Lacp status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-165).
Ingress/Egress rate
limit
Shows if rate limiting is enabled, and the current rate limit.
(page 4-160).
VLAN membership
mode
Indicates membership mode as Trunk or Hybrid (page
4-201).
Ingress rule Shows if ingress filtering is enabled or disabled (page 4-203).
Acceptable frame
type
Shows if acceptable VLAN frames include all types or tagged
frames only (page 4-202).
Native VLAN Indicates the default Port VLAN ID (page 4-204).
Priority for
untagged traffic
Indicates the default priority for untagged frames (page
4-222).
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-219).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 4-205).
Forbidden Vlan Shows the VLANs this interface can not dynamically join via
GVRP (page 4-206).
Private VLAN
mode
Shows the private VLAN mode as host, promiscuous, or
none (4-213).
Private VLAN
host-association
Shows the secondary (or community) VLAN with which this
port is associated (4-214).
Private VLAN
mapping
Shows the primary VLAN mapping for a promiscuous port
(4-215).

SMC Networks 6726AL2 Specifications

General

Brand	SMC Networks
Model	6726AL2
Category	Network Router
Language	English